The Husqvarna Soff-Cut 150 saw is designed for residential and light commercial applications. The lightest gas saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.
Applications
- Push saw designed for residential and light commercial contractors where depth of 1 3/16" is needed 9150)
- Great for contractors that handle some decorative cutting or cleaning up of spalled cuts (150 D)
- Hassle-free method for decorative, spalled joints or miles of airport joints that need to be profiled.
Benefits
- Gasoline saw with easy pull start engine facilitates fast, reliable starts.
- The low-noise and low-dust blade enclosure reduces noise and dust impact on surrounding areas.
- Mechanical blade depth control enables operator to quickly raise and lower the saw.
- Folding frame makes it easier to transport.


- Power Source:
- Gasoline
- Arbor Size:
- Triangular
- Bladeshaft Diameter, in (mm):
- 3/4 (19)
- Cylinders/ Cycle:
- 1/4
- Fuel Capacity, gal (l):
- 0.7 (2.7)
- Air Filter:
- Dry type dual element
- Starter:
- Recoil
- Engine Cooling:
- Air
- Axle Front/Rear, in (mm):
- 1/1 (25.4/25.4)
- Wheels Front, in (mm):
- 3 x 3 (76 x 76) 1 each
- Wheels Rear, in (mm):
- 3 x 3 (76 x 76) 2 each
- Blade Guard Type:
- Enclosed
- Numbers of Belts:
- 1
- Blade Depth Control:
- Manual
- Oil Capacity, qt (l):
- 0.63 (0.6)
- Handlebar Adjustment:
- Fixed
- Transmission:
- Push
- Technical Data for 150:
- Download Here
- Technical Data for 150 D:
- Download Here
GOLD MEDAL EQUIPMENT WARRANTY
New equipment sold by Husqvarna is warranted to be free from manufacturing defects in normal service for a period of one (1) year from date of purchase by the original consumer purchaser. Component manufacturers offer separate warranty periods. Call Technical Services at 800-365-5040 for complete information.
Husqvarna's obligation under this warranty is expressly limited to the replacement or repair at Husqvarna Construction Products, or at a service facility designated by us, of such part or parts as inspection shall disclose to have been defective.
This warranty does not apply to defects caused by damage, unreasonable use, faulty repairs made by others or defects caused by failure to provide reasonable maintenance, while in the possession of the consumer. Further, the warranty is void if the product, or any of its components, is altered or modified by the consumer or if the product is used in an inappropriate manner or with a blade not recommended by the manufacturer.
Husqvarna offers a 1-year warranty on all products including Soff-Cut® Ultra Early Entry™ saws with the following exceptions:
Large flat saws - 2 years (Diesel and gasoline powered flat saws > 30 hp)
K760/K970/K6500/K6500 Ring - 1 year
All other power cutters - 3 months
KV carts (all) - 3 months
Blade clutch on large flat saws - 6 months
Soff-Cut® electric saws - 3 months
PG530/PG680/PG820 grinders - 2 years, or 1,000 hours*
(*) Whichever comes first.
Wear items are not covered under warranty.
Belts
Bearings**
Cart wheels
Filters
Wheels***
Wear pads
Spark plugs
(**) Except IntelliSeal System
(***) Except delamination
DIAMOND TOOL WARRANTY
Laser Weld Blade/Bit Warranty
If the laser weld or diffusion bond between the segment and the core or barrel fails during the normal useful life of the blade or bit, the blade or bit will be replaced FREE OF CHARGE.
Brazed Blade/Bit Warranty
If the brazed bond between the segment and the core or barrel fails within the first .050'' of segment wear, the blade or bit will be repaired or replaced FREE OF CHARGE.
Continuous Rim Blade Warranty
If the bond between the diamond rim and core fails during the normal useful life of the blade, the blade will be replaced FREE OF CHARGE.