Chemical-free floor finish removal with BOOST® Technology
If you demand high levels of cleaning with the ultimate in green benefits, BOOST® Technology is what you've been looking for.
One of our most important features of BOOST - you can remover floor finish without chemicals! That's right, using only water. No longer will you worry about chemical smells, and slippery floors when you remove floor finish. Not to mention the savings in chemical! Couple that with all the other benefits of using BOOST and it's a win-win for everyone. Save up to 70% in solution, extend your pad life by 40%, get longer battery runtimes, and cut labor time in half!
Here are some of BOOST's great features and benefits:
- The only autoscrubber technology that is truly capable of chemical-free finish removal!
- Up to 70% less water & chemical usage
- 25% increase in battery runtime
- 40% increase in pad life
- Half the trips for dumps and fills
- Reduced noise levels to improve operator safety
The Focus II BOOST Compact L20 has also been certified as "High Traction" by the The National Floor Safety Institute. The new Focus® II models are the first 20" autoscrubbers® available with Clarke’s revolutionary BOOST® Technology. If you demand high levels of cleaning with the ultimate in green benefits, BOOST technology offers 70% reduction in water and chemicals, 40% increase in pad life, and the added benefit of stripping floors chemical-free, compared to traditional disc models.
Compact L20 Boost Features
- Superior solution pick-up
- Quiet at 65 dB(A)
- Easy operation
- Environmentally friendly with efficient solution usage
- Green Certified Equipment by Clarke®
- Easy access to battery compartment is great for maintenance and installation.
- Onboard battery charger allows charging at any convenient electrical outlet
- One-touch control panel is simple and effortless to operate. Ergonomically placed controls for all functions
- Powerful 3/4 HP motor drives the high speed orbital agitation of the BOOST model
- Rugged Polydur® tanks withstand impact and resists chemical damage
- Large top opening aids in clean out of recovery tank
- Large diameter, non-marking wheels provide high traction
- Clarke’s patented pulse solution control applies an accurate and conservative amount of solution
- The solution tank fill is conveniently located on the rear of the machine for ease of filling while draining the recovery tank
- Recovery drain is located high on the machine to allow draining into a high deep sink or toilet
- Squeegee is easy to remove without tools, and breaks away upon impact to prevent damage. Polyurethane front and rear blades wear longer and resist chemicals. Blades easily index without the use of tools.
- Emergency power disconnect.
What enhances its productivity?
- Efficient utilization of solution
- Compact design, large capacity
- Easy on/off brush
- Long run times
- Solution and brush off in neutral
What are the safety features?
- Security key switch
- Safety yellow palm switches
- Circuit breaker protection
- Scrub Head Type:
- BOOST
- Cleaning Width:
- 20"
- Drive Type:
- Power Traction
- Working Voltage:
- 24 V DC
- Standard Batteries (2):
- 12 V 130 Ah @ 20 hr rating (wet) or 12 V 114 Ah @ 20 hr rating (AGM)
- Battery Protection System:
- Low voltage cut-off of brush and solution
- Vacuum Motor Power:
- 0.5 hp, 2-stage tangential discharge
- Solution/ Recovery Tank:
- 14.5 gal
- Solution Flow:
- 0 - 0.3 gal/ min
- Brush Motor Power:
- 0.75 hp (560 W)
- Brush Pressure:
- 40 lbs and 75 lbs
- Disc, Pad, Brush Sizes:
- 14 x 20 in
- Brush Speed:
- 2,250 RPM
- Sound Level:
- 65.8 dB A
- Onboard Charger:
- Standard
- Dimensions:
- 51" x 29" x 42"
- Width (without squeegee):
- 29.9 in
- Agency Approval:
- cETLus
- Warranty:
- Polydur Body - 8 Years, Parts - 3 Years, Labor - 1 Year, Batteries - 18 months prorated (90 days unconditional)
- Weight:
- 400 lbs
- Product Brochure:
- Download Product Brochure