The gas powered Ultra-Vac 1250 Gas Vac is equipped with a gas engine and a large CFM blower for use with bigger machines that require more air flow. It also works with masonry and block saws where gas powered equipment is necessary.
The U.S.SAWS Ultra-Vac 1250-G is a heavy duty vacuum designed for collecting concrete dust where a gas powered engine is most convenient. The 1250-G is the preferred vacuum system for the JS-131 & JS-160P Joint Cleanout Saw, the CC-100 Crack Chaser and a variety of Early Entry Saws. The wide, flat wheels make it a good choice for early entry control joint cutting as they will lessen the possibility of indentations in the slab. This machine is constructed of an all steel tube frame with a polyethylene body for years of use and abuse. Powered by a reliable Honda GX240. This vac comes with a 25’ 3” hose. The large 12 pleat polyfelt filter allows continued airflow even when the 12.5 gallon dust bin is near capacity. External HEPA filters and Longopac bagging systems are available options.
- early entry saws
- scarifiers
- line stripe removers
- Joint Saws/Mills and crack chasers
- 450 cfm
- 115 inches of lift
- 12.5 Gallon Dust Bin Capacity. Can also be used with the optional bagging cart for use with Longopac containment bags.
- Super Heavy Duty. Nearly indestructible polyethylene body.
- Manual filter clearing mechanism (Required under OSHA silica dust law)
- 99%+ Efficient 18 square foot main filter. 99.95% Efficient @ 0.3 um secondary HEPA Filters available.
