A propane drive version of our largest and most powerful floor grinding machine PG 830. The propane drive makes your operation independent of electrical access and makes PG 830 P the perfect choice for large outdoor concrete areas. The fuel system reduces the risk of freezing when using liquid withdrawal propane. Key components are sealed against dust and slurry for maximized reliability and low maintenance. It is easy to handle, tilt and operate with standard adjustable weights for extra grinding pressure.
Features:
- Sealed to last: Sealed grinding head with 1000 hrs service interval. No dust or water can intrude to damage components.
- Adjustable grinding pressure: The optional weights are a must have for every professional grinder, as they allow to adjust the grinding pressure in three pre-set positions. They also make tilting the machine that much easier.
- Ergonomic handle: Adjustable handle for better ergonomics.
- Hour and RPM meter: Possibility to log operating hours and read the RPM of the machine.
- Fuel Injection: The Fuel system reduces the risk of freezing when using liquid withdrawal propane.
- Exhaust catalyst: Exhaust catalyst reduces emissions.
Specs:
PG 830 P
|
970 62 70‑01
|
ENGINE |
|
Motor/engine model |
FX850V |
Engine Power |
27 hp |
Exhaust emissions (CO₂ EU V) |
0 g/kWh |
MOTOR |
|
Power source |
Propane |
EQUIPMENT |
|
Grinding width |
31.5 in |
Number of grinding discs |
3 pcs |
Direction of rotation |
One direction |
Grinding disc diameter |
10.6 in |
Grinding disc speed min |
766 rpm |
Grinding disc speed max |
861 rpm |
TRANSMISSION |
|
Type of operation |
Push |
DIMENSIONS |
|
Product size length |
88.1 in |
Product size width |
32.7 in |
Product size height |
45.7 in |
Weight |
1,235 lbs |
GOLD MEDAL EQUIPMENT WARRANTY
New equipment sold by Husqvarna is warranted to be free from manufacturing defects in normal service for a period of one (1) year from date of purchase by the original consumer purchaser. Component manufacturers offer separate warranty periods. Call Technical Services at 800-365-5040 for complete information.
Husqvarna's obligation under this warranty is expressly limited to the replacement or repair at Husqvarna Construction Products, or at a service facility designated by us, of such part or parts as inspection shall disclose to have been defective.
This warranty does not apply to defects caused by damage, unreasonable use, faulty repairs made by others or defects caused by failure to provide reasonable maintenance, while in the possession of the consumer. Further, the warranty is void if the product, or any of its components, is altered or modified by the consumer or if the product is used in an inappropriate manner or with a blade not recommended by the manufacturer.
Husqvarna offers a 1-year warranty on all products including Soff-Cut® Ultra Early Entry™ saws with the following exceptions:
Large flat saws - 2 years (Diesel and gasoline powered flat saws > 30 hp)
K760/K970/K6500/K6500 Ring - 1 year
All other power cutters - 3 months
KV carts (all) - 3 months
Blade clutch on large flat saws - 6 months
Soff-Cut® electric saws - 3 months
PG530/PG680/PG820 grinders - 2 years, or 1,000 hours*
(*) Whichever comes first.
Wear items are not covered under warranty.
Belts
Bearings**
Cart wheels
Filters
Wheels***
Wear pads
Spark plugs
(**) Except IntelliSeal System
(***) Except delamination
DIAMOND TOOL WARRANTY
Laser Weld Blade/Bit Warranty
If the laser weld or diffusion bond between the segment and the core or barrel fails during the normal useful life of the blade or bit, the blade or bit will be replaced FREE OF CHARGE.
Brazed Blade/Bit Warranty
If the brazed bond between the segment and the core or barrel fails within the first .050'' of segment wear, the blade or bit will be repaired or replaced FREE OF CHARGE.
Continuous Rim Blade Warranty
If the bond between the diamond rim and core fails during the normal useful life of the blade, the blade will be replaced FREE OF CHARGE.